General Function; Step 1) Inserting (Replacing) The Batteries - eQ-3 Premium Mode D'emploi

This energy-saving controller for radiators can be used to
control room temperature on the basis of time. The actuator moves
a valve, thereby allowing the amount of heat flowing to the heat-
ing appliance to be controlled. The controller is compatible with all
standard heating appliance valves. The large illuminated display
ensures user-friendly operation. A wireless receiver allows the
device to receive commands from taught-in system components.
Installation can be achieved in 3 easy steps.

6. (Step 1) Inserting (replacing) the batteries

Remove the battery compartment
•
cover.
• Insert 2 new LR6 batteries (Mignon/AA)
into the battery compartment, ensuring
they are the right way round.
• Reattach the battery compartment
cover and click into place.
New alkaline batteries have a life of ap-
proximately two years. A battery symbol
( ) will indicate when the batteries need to be replaced.
After removing the old batteries, please wait approximately
1 minute before inserting the new ones. This device does
not support operation with rechargeable batteries.
Never recharge standard batteries.
Doing so will present a risk of explosion.
Do not throw the batteries into a fire.
Do not short-circuit batteries.

5. General function

Used batteries should not be disposed
of with regular domestic waste. Instead,
they should be taken to your local battery
disposal point.
23