Setting The Weekly Program - eQ-3 Premium Mode D'emploi

"InS" will appear on the display, press the OK button.
•
• The actuator will perform an adjustment run ("AdA" will
appear on the display, operation not possible).
After that, the actuator will be ready for operation (Auto mode).
•
If the adjustment run was initiated prior to installa-
tion, or if an error message will be displayed (F1, F2,
F3); press OK to move the motor back to the "InS"
position.
The weekly program allows you to set up to 3 separate
heating periods (7 switching times) for each day of the
week. Programming is performed in relation to the se-
lected days, for which temperatures must be stored for a
period from 00:00 to 23:59.
Press and hold down the menu
•
button for more than 3 seconds.
"Pro" will appear on the display.
•
• Confirm with OK.
"dAy" will appear on the display.
•
The setting wheel can be used
to select an individual day of the
week, all working days, the weekend or the entire week
(example shows working days selected).
Confirm with OK.
•
• Use the setting wheel to set the first time segment (exam-
ple shows 0:00 to 6:00).
Confirm with OK.
•
Then, select the required temperature for the selected time
•
segment (example shows 17.0°C).
• Confirm with OK.
Keep repeating this process until you have finished storing
•
temperatures for the period from 0:00 to 23:59.
26

9. Setting the weekly program