Sonoro sonoroHIFI SO-510 Mode D'emploi page 84

L CAUTION!
Risk of injury due to heavy weight!
Due to its weight, the device can cause injury if
carried by a single person during transportation,
either during lifting or if it is dropped on body
parts.
– Always work in a team of two when lifting and
transporting the device.
– Always work in a team of two when attaching
the stand.
L NOTICE!
Material damage due to incorrect attachment
will result in material damage!
Incorrect attachment can cause damage to the
surface and lead to malfunctions.
– When attaching the stand, place a cloth under-
neath the device to prevent the surface from
being scratched.
– The device is very heavy. Always work in a team
of two for any assembly work in order to pre-
vent the device from falling.
– Always take care to ensure that cables do not
get trapped when performing any work on the
device.
– The front, edges and corners of the device are
all vulnerable to pressure. Protect these areas
to prevent them from being subjected to exces-
sive pressure.
84
Attaching the threaded rod
Fig. 10: Attaching the threaded rod
1. Insert the pre-assembled threaded rod
through the baseplate from below
2. Turn the threaded rod
pointing away from you.
3. Place the protective cover with cable opening
on the threaded rod
4. Make sure that the cut-out in the protective
cover with cable opening
you.
.
until the cut-out is
.
points away from
© sonoro audio GmbH 2016