In The Event Of Scale Deposits; Inserting/Removing The Scale Fi Lter Insert; Storage - SilverCrest SWK 3000 EDS B2 Mode D'emploi

In the event of scale deposits:

Scale deposits on the bottom of the appliance lead to increased energy con-
sumption and reduce the service life of the appliance.
Descale the appliance as soon as scale deposits become apparent.
Before descaling, remove the scale fi lter insert 6 (see chapter "Inserting/
■
removing the scale fi lter insert").
■ Use a descaler designed for household appliances (e.g. for coff ee machines).
Proceed as detailed in the instructions provided for the use of the decalcifying
agent.
■ After descaling, rinse the appliance with lots of clean water.
Inserting/removing the scale fi lter insert
1) Open the lid.
2) Press the tab on the scale fi lter insert 6 slightly downwards and then pull the
scale fi lter insert 6 inwards and downwards so that you can pull it out of its
mounting.
3) Then pull the scale fi lter insert 6 upwards and out of the kettle.
4) Clean the scale fi lter insert 6 with a slightly moistened dishcloth and under
running water.
5) After cleaning, insert the scale fi lter insert 6 again. Ensure that it is sitting
correctly in its mounting, and that the tab has clicked into place.
NOTE
If the scale deposits in the scale fi lter insert 6 have solidifi ed, place the
►
fi lter in a water-vinegar solution at a ratio of 6:1 for a few hours. The scale
deposits will dissolve themselves. Rinse the scale fi lter insert 6 with plenty
of clear water.

Storage

■ Allow the appliance to cool down completely before putting it into storage.
Wind the power cable around the cable winder 4 under the base 3.
■
■ Store the appliance at a dry location.
SWK 3000 EDS B2
GB
IE
9