Clearing All The Contents Of The Remote's Memory; Changing Button Assignments (Rm-Aau008 Only) - Sony STR-DA3200ES Mode D'emploi

Clearing all the contents
of the remote's memory
1,2
1
Press and hold MASTER VOL –
first, then press ?/1 and then
AV ?/1.
The RM SET UP button flashes three
times.
2
Release MASTER VOL –.
All the contents of the remote's memory
(i.e., all the programmed data) are
cleared.
Changing button
assignments
only)
You can change the factory settings of the
input buttons to suit the components in your
1
system. For example, if you connect a DVD
player to the VIDEO 2 IN jacks on the
receiver, you can set the VIDEO 2 button on
this remote to control the DVD player.
Note, however, that the settings of the TUNER
button cannot be changed.
1
Press RM SET UP for more than
2 seconds.
The indicator lights up.
2
Press the input button of which
you want to change the
assignment.
The indicator turns off once and turns on
again when a valid button is pressed. Only
the first input button that is pressed will
be registered.
Example: Press VIDEO 2.
(RM-AAU008
1
2,3
4
continued
115 GB