Image Position Adjustment (Av Mode Only); Automatic Image Position And Clock Adjustments (Pc Mode Only); Manual Image Position And Clock Adjustments (Pc Mode Only) - Pioneer PDP-6072HD Mode D'emploi

Adjustments and Settings
11
Image position adjustment
(AV mode only)
Adjusts the horizontal and vertical positions of images on the
Plasma Display.
1
Press HOME MENU.
2
Select "Option". ( /
3
Select "Position". ( /
4
Select "H/V Position Adjust". ( /
Position
H/V Position Adjust
Reset
5
Adjust the vertical position ( / ) or horizontal position
( / ).
6
Press HOME MENU to exit the menu.
NOTE
• To restore the factory defaults for all the items, press
select "Reset" in step 4, and then press ENTER. A
confirmation screen appears. Press
then press ENTER.
• Adjustments are stored separately for each input source.
Automatic image position and clock
adjustments (PC mode only)
Use Auto Setup to automatically adjust positions and clock of
images coming from a personal computer.
1
Press HOME MENU.
2
Select "Option". ( /
3
Select "Auto Setup". ( /
Option
Auto Setup
Manual Setup
• Auto Setup starts.
4
Press HOME MENU to exit the menu.
NOTE
• When Auto Setup is finished, "Auto Setup completed."
appears.
• Even when "Auto Setup completed." appears, Auto Setup
may have failed, depending on conditions.
• Auto Setup may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the PC
image and try again.
• Be sure to connect the computer to the Plasma Display and
switch it on before starting Auto Setup.
68
En
then ENTER)
then ENTER)
then ENTER)
/ to select "Yes", and
then ENTER)
then ENTER)
Manual image position and clock
adjustments (PC mode only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions
and clock of images when necessary.
1
Press HOME MENU.
2
Select "Option". ( /
3
Select "Manual Setup". ( /
4
Select an item to be adjusted. ( /
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
5
Perform adjustment. ( /
• With "Clock" or "Phase" selected, you can change the
parameter using
/ to
6
Press HOME MENU to exit the menu.
NOTE
• To restore the factory defaults for all the items, press
select "Reset" in step 4, and then press ENTER. A
confirmation screen appears. Press
then press ENTER.
then ENTER)
then ENTER)
then ENTER)
0
0
or / )
/ .
/ to select "Yes", and
/ to