Connecting An Av Receiver Or Amplifier - Pioneer ELITE BDP-88FD Mode D'emploi

Connecting an AV receiver or
02
amplifier
Connect to an AV receiver or amplifier in order to enjoy
the surround sound of Dolby TrueHD, Dolby Digital Plus,
Dolby Digital, DTS-HD Master Audio, DTS-HD High
Resolution Audio, DTS Digital Surround, LPCM, AAC or
DSD. For instructions on connecting the TV and speakers
to the AV receiver or amplifier, refer to the operating
instructions for AV receiver or amplifier.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
BDP-88FD's rear panel
HDMI cable
(commercially
available)
AV receiver
or amplifier
HDMI cable
(commercially
Direction of signal flow
20
En
ZERO SIGNAL
HDMI OUT DIGITAL AUDIO OUT LAN
SUB MAIN
OPTICAL COAXIAL
Match the
direction of the
plug to the
terminal and
insert straight.
AV receiver
or amplifier
To HDMI input
terminal
available)
TV
Achieving better video and sound quality
When connecting one TV (or projector) and AV amplifier
to the player, connect in such a way that the video and
audio signals are transferred separately in order to
achieve higher quality video and sound.
HDMI cable
(commercially
AV receiver
or amplifier
RS-232C
USB
(10/100)
Direction of signal flow
Caution
• Make sure to set HDMI Mode to Separate (page 44).
• If the AV amplifier connected to the HDMI OUT (SUB)
terminal is also connected to a TV, the TV's input may
switch automatically. If this happens, turn off the
control function with HDMI on the TV.
BDP-88FD's rear panel
ZERO SIGNAL
HDMI OUT DIGITAL AUDIO OUT
SUB MAIN
OPTICAL COAXIAL
available)
Match the
direction of the
plug to the
terminal and
insert straight.
TV
RS-232C
LAN USB
(10/100)