Target Point - Kenwood TH-D74A Guide De L'utilisateur

4 Select [Clear] or [Clear All] and press [A/B].
The clear confi rmation screen appears.
[Clear]: Clears the selected position memory.
[Clear All]: Clears all position memories.
5 Press [A/B] to clear the position memory.

TARGET POINT

You can register positional information for a target point.
1 Press [MARK].
The position memory list screen appears.
2 Select a position memory number.
3 Press [A/B].
The target point mark <
time. The target point mark disappears when pressing
[A/B] again.
Target point distance and Target direction
1 Press [F], [MARK]
[ ]
2 Press .
[Target point distance and Target direction screen]
appears. When pressing [F] while the target point distance
and target direction are displayed, the North Up display
(displays North as the top) changes to the Heading Up
display (displays the current travel direction as the top) or
vice-versa.
> appears to the right of the
GPS
29