Toshiba RBC-TWP30E2 Manuel D'installation page 10

2. Attaching the clamp filter
Attach the clamp filter supplied with the outdoor unit to the lower outdoor fan motor lead wire.
• Make sure that the claw of the clamp filter is securely locked.
• Pass the banding band supplied with the outdoor unit through the upper hole of the clamp filter to clamp it together with the
fan motor lead wire.
• The fan motor lead wires are connected to the connectors CN301 and CN300 on the P.C. board of the outdoor unit.
CN301 CN300
– 10 –
Fan motor lead wire
(Lower side)
Banding band
Clamp filter