Cal Spas Home Resort Fitness Serie Guide D'utilisation page 22

--For C Temperature unknown
- - - - - - Temperature not current in Economy or
Sleep mode.
BUF Internal problem detected.
Stby Standby Mode has been activated by
pressing a button combination on the
user panel.
SF Safety Suction.
Periodic Reminder Messages
Press the "Mode" button to reset a displayed reminder)
Message Frequency
rPH Every 7 days
rSA Every 7 days
rCL Every 30 days
rtg Every 30 days
rdr Every 90 days
RCO Every 180 days
RCH Every 365 days
2012 Portable Spa
LTR20121001, Rev. A
After the pump has been running for two minutes,
the temperature will be displayed.
In Economy or Sleep mode, the pump may be off for
hours outside a filter. If you wish to see the current
spa temperature, either switch to Standard mode or
turn Jets1 on for at least two minutes.
Repair required. Contact your dealer or service
organization.
Press any button to leave Standby Mode and return
to normal operation.
Spa is shut down. The display will show "SF" when a
vacuum switch closes. All functions will turn off and
the system will be disabled until a panel button is
pressed.
Action Required
Test and adjust chemical levels per manufacturer's instructions.
Test and adjust chemical levels per manufacturer's instructions.
Remove, clean, and reinstall filter per manufacturer's instructions.
Test & reset GFCI per manufacturer's instructions. Drain and refill spa per
manufacturer's instructions.
Drain and refill spa per manufacturer's instructions.
Clean and condition spa cover
Install New Bio-Clean™ Filter
19
www.calspas.com