ensto ECO16BT Instructions D'installation Et De Fonctionnement page 25

temperature has dropped sufficiently. This operation method is intended to protect
sensitive floor materials such as parquet. Most parquet manufacturers recommend
the maximum temperature of floor covering approximately 27°C.
Note! The floor sensor only measures the concrete temperature. The floor cover-
ing material temperatures are usually about 5°C lower than the concrete tempera-
ture, in which case the maximum limitation temperature can be set at about +32°C.
Please set the limitation as low as possible and raise the value afterwards if needed.
However, each flooring material is unique, so when an accurate temperature limit is
needed, the floor temperature must be checked with a separate thermometer.
• In "Power" mode the thermostat adjusts the heating without sensors according to
power. Select the length of the power cycle from "Settings / Power mode cycle time".
Select the desired heating power 0 - 100% with the adjustment knob E. The heating
operates in cycles of the selected period of time. The heating power (%) you select
determines how long the heating is on and off during one cycle. For example, if you
select 60 minutes for the cycle time and 60% for the heating power, the heating is on
for 36 minutes and off for 24 minutes.
Temperature Change with Calendar, Boost and Vacation Functions
5.5. You can change the setting temperature adjusted with the adjustment knob E on the
thermostat.
• The change may be either a rise or a drop in temperature.
• The blue LED indicator C is on when the temperature change is connected.
5.6. You can carry out temperature changes in different ways depending on what kind of
a change is needed.
• "Calendar" is intended for weekly reoccuring events. For example, on weekdays you
can drop the temperature overnight and while you are away, during weekends you
may want to drop the temperature overnight. Note! When making settings for over-
night, the night must be in two sections.
• "Boost" is intended for a temporary temperature change. For example, after a shower
you can raise the temperature in the bathroom, so that the floor will dry faster.
• "Vacation" is intended for long-term changes in temperature, e.g for a weekend
break or an annual holiday.
5.7. The "Calendar", "Boost" and "Vacation" buttons are on / off buttons. When the tem-
perature change is activated, the "Calendar" and "Vacation" buttons are green, the "Boost"
button is orange.
5.8. Press the
When the function "Adaptive temperature change" is active, the thermostat will
5.9.
advance the heating, so that the desired temperature has been reached at the scheduled
time. By default, the function is on.
button on home display to enter the editing mode.
RAK121 / 4.5.2021 25 / 84