Button Function; Lcd-Anzeige - SPORTSTECH ES400 Mode D'emploi

RESET
• In setting condition, press RESET key once to reset the current function figures.
• Press RESET key and hold for 2 seconds to reset all function figures, and have Bi
sound for prompt at the same time.
• Each adding by pressing once, press and hold the button to increase the value
SET
faster
• TMR setting range: 0:00~99:00 (Each increment is 1:00)
• CAL setting range: 0~9990 (Each increment is 10)
• DST setting range: 0.0~999.0 (Each increment is 1.0) KM
• Choose each function by pressing MODE key. In SCAN mode, press MODE key can
MODE
lock the current function.
• Press MODE key and hold for 2 seconds to reset all function figures.
Power on
• LCD will display all segments with Bi sound as

6. BUTTON FUNCTION

6.1 LCD-ANZEIGE

Drawing A
40