Festo SB 60 Notice Simplifiee page 11

VISB/SF 60
1
User instructions
The SB/SF 60 control block is designed exclusively for the fol-
lowing application:
–
Controlling pneumatic and electric actuators.
–
Querying electronic sensor signals using input modules.
The indicated limits to the technical data must be maintained.
See the Pneumatic Descriptions P.BE MIDI/MAXI-... and
P.BE ISO-... and the Electronics Description P.BEVISB60-03...
for detailed information.
WARNING:
• Turn off the voltage before you connect or disconnect the
connector (function damage).
• Connect a protective earth conductor with sufficient cross
section to the connection marked with
valve terminal is not fitted on an earthed machine stand.
PLEASE NOTE:
Start up only fully mounted and wired valve terminals.
9804a
, if the
11