Lenz Digital plus SILVER+ Mode D'emploi page 49

0-255 Lighting effect at function outputs C and D.
62
The tens digit of the value stands
for function output D:
0
1
2
3
4
63 Flashing frequency for function outputs C and D:
default approx. 1 sec, f = 1 / ( 0.03 * (1 + CV63))
64 Function mapping: lighting effect at function outputs C and D
67.. 0-255 Values for characteristic speed line
94
112 0-255 Duration of motor timeout when track signal has stopped.
t = CV112 * 0.016sec, default approx. 0.25 sec
0-255 Minimum PWM value, control for motor types 4 or 5
113
0-255
114 Change duty cycle for motor type 4 or 5
116 0-255 Sets brightness at function output C, 255=max
117 0-255 Sets brightness at function output D, 255=max
0-255 Sets brightness at function output E, 255=max
118
0-255 CV (indicator) for S.U.S.I., offset 800
126
0-255
127 CV (transport device) for S.U.S.I.
No effect
Flashing at same time as
function output C
Flashing alternately to function
output C
Flickering type 2 (less smooth)
Flickering type 3 (excitedly)
The units digit of the value
stands for function output C:
0 No effect
1 Flashing
2 Flickering type 1
(smooth)
49
0
E
32
0
16
40
10
255
255
255
102
0