Paragraph - Athena AT BT Série Manuel D'installation

Setting the Language
Programming
PROG
Pump Functions
-
Max flow rate
P100%
-
Alarm Relay
N.Open
-
Language
English
-
Paragraph 1 – Manual Dosage
Programming
PROG
Configuration
Pump Funtions
-
+
Pump Functions
Display during Operation
Operating mode

Man = Manual
Alarms and statuses

Lev = Level alarm

Flw = Flow alarms



EM00136160
-
+
-
The pump operates in constant mode and the flow can only be regulated
manually by pressing the
increase the flow, or the
FLOW sensor
status
MAN F F F

Lev Stop P100%
Pump status
Empty = pump in start
Stop = pump stationary
Paus = pump in pause
Makes it possible to select the language. The pump is set in
English in the factory.
Changes can be made by pressing the
using the
to confirm and return to the main menu
Current dosage speed
(depends on selected unit of
measurement)
Percentage, Frequency,
l/h, Gph, ml/m
rev. 1.1
Operation
keys to set the new value. Press
Operation
keys at the same time in order to
keys to decrease it.
Display during Setting (MODE key)
Operating mode

Man (during manual modification of the
flow it displays the corresponding
frequency value)
MAN
Current dosage value

Modify the maximum flow by pressing the
+ or – keys at the same time
key, then
P100%
3