Removing The Freezer Accessories - Atag KA2211DC Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

operating the side-by-side
refrigerator

REMOVING THE FREEZER ACCESSORIES

Cleaning and rearranging the interior of the freezer is simple.
1. Remove the Glass shelf by pulling the shelf out as far as it will
go. Then, gently lift it up and remove it.
2. Remove the door bin by holding the door bin with both hands
and then gently lift it up.
3. Remove the Plastic drawer by pulling it out and slightly lifting
it up.
4. Remove the Icemaker bucket by lifting up and pulling it out.
5. Remove the front leg Cover by opening both the freezer and refrigerator doors, and removing
the three screws. Once the screws are free, detach the cover.
To reattach the front leg cover, place it back in its original
position and tighten the three screws.
Do not use excessive force when removing the cover.
Otherwise, the cover may break and cause injury.
34_
operating

Publicité

Table des Matières
loading

Table des Matières