Bertazzoni REF30PIXL Mode D'emploi page 17

How to check the status of the filter
How to set the filtered water meter to zero
How to activate filter Bypass
Manual Clean, Water Filter
How to manually clean the filter
Correctly position the ice tray or another suitable
container under the IceMaker to collect water,
then close the drawer. At the end of the operation,
wash the tray.
Water Filter
The View Status function permits visualizing the time left before the filter needs
to be replaced.
Reset Filter The Reset Filter function sets to zero the time left before the filter needs to be
replaced. It is necessary to set the meter to zero each time the cartridge is re-
placed.
Bypass Filter This function is to be activated when it is not necessary to filter the water,
because excellent quality water is already available from the home water
system.
If ice production has been disabled or unused for a long period it is recom-
mended to perform a Manual Clean function to flush out water which has
sat in the system during this period. Repeat the operation until the water
is clean.
Before proceeding it is important to turn off the ice maker by pressing
button .
Settings and Special Functions
5
15