Télécharger Imprimer la page

Important Safety Instructions - Makita DC18RE Mode D'emploi

Chargeur rapide
Masquer les pouces Voir aussi pour DC18RE:

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Symbols
The followings show the symbols used for the equipment. Be sure that you understand their meaning before use.
• Charging.
• Delay charge (Battery cooling,
too cold battery, or waiting for
charging).
• Conditioning
• Do not short battery.
• Do not expose battery to water or
rain.
• Read instruction manual.
Specification:
Model
Input
Output
For LXT battery
For CXT battery
Weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:
SAVE THESE
1.
INSTRUCTIONS
– This manual contains important
safety and operating instructions
for battery charger.
2. Before using battery charger, read all
instructions and cautionary markings
on (1) battery charger, (2) battery, and
(3) product using battery.
3. CAUTION – To reduce risk of injury,
charge only Makita type rechargeable
batteries. Other types of batteries may
burst causing personal injury and
damage.
4. Non-rechargeable batteries cannot be
charged with this battery charger.
5. Use a power source with the voltage
specified on the nameplate of the
charger.
2
DC18RE
A.C. 120 V 50–60 Hz
D.C. 14.4 V–18 V
D.C. 10.8 V–D.C. 12 V (max.)
1.2 kg (2.7 lbs)
6. Do not charge the battery cartridge
in presence of flammable liquids or
gases.
7. Do not expose charger to rain, snow,
or wet condition.
8. Never carry charger by cord or yank it
to disconnect from receptacle.
9. After charging or before attempting
any maintenance or cleaning, unplug
the charger from the power source.
Pull by plug rather than cord whenever
disconnecting charger.
10. Make sure cord is located so that it
will not be stepped on, tripped over,
or otherwise subjected to damage or
stress.
11. Do not operate charger with damaged
cord or plug. If the cord or plug is
damaged,
service center to replace it in order to
avoid a hazard.
• Ready to charge.
• Charging complete.
• Defective battery.
• Cooling abnormality.
• Do not destroy battery by fire.
• Always recycle battery.
ask
Makita
authorized

Publicité

loading