Legend; Device Description; Operation - Cartrend 146000 Notice D'instructions Originale

LEGEND

Note all signs and symbols contained in these
instructions and on the tool. Please memorise these
signs and symbols. You will be able to work with the
tool more effectively and safely if you can interpret
the signs and symbols correctly.
Warning!
Read the operating instructions before
putting the device into operation!
Wear protective goggles!
Wear hearing protection!
Wear good, robust gloves!
When using materials that cause dust
always wear respiratory protection.
Battery Li
Avoid prolonged exposure to the sun.
Do not throw into fire
Do not throw into water
Used batteries should not be disposed
of in domestic waste. There is a statu-
tory obligation to return batteries for
correct disposal.
Do not dispose of electric power tools
in domestic waste!

DEVICE DESCRIPTION

1. Anvil (adapter block)
2. On/Off switch
3. Anti-clockwise/clockwise switch-over
(Sense of rotation change-over)
4. Battery block
5. Handle
6. LED light
7. Charger
8. Running sleeve
9. Locking switch

OPERATION

Read all these instructions before using this tool. Take
utmost care when working with an electric power
tool.
On/Off switch
Switching on:
To operate the device, press the on/off switch (2) and
keep it depressed.
Switching off:
To switch off the device, release the on/off switch (2).
The speed of rotation can be changed by modifying the
amount to which the on/off switch is pressed. The speed
remains low when the on/off switched is depressed only
a small amount and increases with the pressure on the
switch.
LED for illumination
The LED light (6) facilitates illumination of the location
of the screw or borehole when lighting conditions are
unfavourable. The LED light illuminated automatically as
soon as you depress the on/off switch.
Anti-clockwise/clockwise switch-over
(Sense of rotation change-over)
The anti-clockwise/clockwise switch-over (3) above the
on/off switch can be used to set the sense of rotation
of the cordless impact wrench and also to secure the
cordless impact wrench against unintended activation.
You can choose between anti-clockwise and clockwise
rotation. In order to avoid damage to the gears, the sense
of rotation may only be switched over when the device
is at standstill. The slide switch at centre position means
that the on/off switch is blocked.
22