10
Finalizing the Installation
Préparation du support de fixation et de cloison sèche
Les deux supports et les trois supports de cloison sèche sont livrés à plat. Assurez-vous de plier (et
sécuriser) les supports et les supports de cloison sèche comme indiqué ci-dessous.
Les deux entretoises sont expédiées à plat.
The two standoffs are shipped flat.
Bend the three drywall supports up 90 degress (the
Pliez les trois supports de cloisons sèches à 90
degrés.
outer two are concealed when the standoffs are flat).
When in place, the
Une fois en place, les
entretoises et les supports
standoffs and drywall
de cloisons sèches doivent
ressembler à ceux illustrés
supports should look
à droite.
as shown to the
right.
© Travis Industries
(for qualified installers only)
Bend both standoffs as shown below.
Pliez les deux entretoises comme indiqué ci-
dessous. Retirez la vis du haut du foyer et fixez le
Remove the screw from the top of the
support comme illustré.
fireplace and secure the standoff as shown.
10/20/2021 – 1565-FR
564 GSR2 25K CF