Important Instructions; Cleaning And Maintenance; Safety Cautions - Remington Ionic Rollers KF20i Mode D'emploi

ENGLISH
Do not pour any hair lotions or conditioners into the rollers.
The lid should be closed while the rollers are heating up.
Ensure there is a roller on each slot while the unit is heating up and that each roller is
properly inserted into the base unit.
Care should be taken to avoid contact between the hot surface of the roller and the
sensitive skin of the face and neck.
DO NOT USE ON ARTIFICIAL HAIRPIECES OR WIGS.
Make sure the unit is unplugged and cool.
Rollers may be cleaned with a damp cloth and mild detergent or soap.
Dry rollers completely before replacing in unit.
WARNING – FOR ADDITIONAL PROTECTION THE INSTALLATION
OF A RESIDUAL CURRENT DEVICE (RCD) WITH A RATED RESIDUAL
OPERATING CURRENT NOT EXCEEDING 30mA IS ADVISABLE. ASK AN
ELECTRICIAN FOR ADVICE.
WARNING – THIS APPLIANCE MUST NOT BE TAKEN INTO A BATHROOM.
IT SHOULD NOT BE USED NEAR BATHTUBS, SHOWERS, BASINS OR
OTHER VESSELS CONTAINING WATER OR OTHER LIQUIDS.
THE ROLLERS SHOULD BE UNPLUGGED FROM MAINS SUPPLY WHEN
NOT IN USE.
Do not leave the rollers unattended when switched on.
Allow heated rollers to cool down before storage.
Do not immerse in water or other liquids.
Do not wrap the cord around the unit. Check cord regularly for any sign of damage.
Damaged cords can be dangerous.
Do not place rollers on soft material e.g. carpet, bedding, towels, rugs etc.
Always ensure the voltage to be used corresponds to the voltage stated on the unit.
2
  5(0 ,)8 .)L /LQGG 

IMPORTANT INSTRUCTIONS

CLEANING AND MAINTENANCE

SAFETY CAUTIONS

This product is not suitable for use in bath or shower.