Important Instructions - Remington Fast Curls KF40E Mode D'emploi

ENGLISH
Эта инструкция скачана с сайта www.remington-shop.ru
INSTRUCTIONS FOR USE
Before setting, hair should be dry or slightly damp, never wet.
Section hair and comb it smooth.
Plug cord into the outlet.
Rollers will heat up in 5-8 minutes and will reach optimal curling temperature in 12-14
minutes.
When you feel your setters are ready, open the lid for 1 minute and then begin use.
Squeeze the starter clip open and clamp onto the tip of a section of hair. (Fig.1)
Roll up the desired amount of hair and secure the roller with the comfort clip. (Fig.2 and 3)
Once the entire head is set, wait until the rollers are cool, then unwind. Start with the
rollers you placed in first.
Unplug the unit. Rollers will remain actively curling for 10 minutes.
To release secured roller, remove each clip and roller gently.
Unwind, never pull.
Let each new curl spring back into position and cool for a moment.
Spritz hair with desired styling product for extra hold.

IMPORTANT INSTRUCTIONS

Do not pour any hair lotions or conditioners into the rollers.
The lid should be closed while the rollers are heating up.
Ensure there is a roller on each slot while the unit is heating up and that each roller is
properly inserted into the base unit.
Care should be taken to avoid contact between the hot surface of the roller and the
sensitive skin of the face and neck.
DO NOT USE ON ARTIFICIAL HAIRPIECES OR WIGS.
2