Product Information; How It Works; Versions - Phoenix Mecano RK ROSE+KRIEGER Powerlift M Memory Notice D'assemblage

6. Product information

6.1 How it works

The RKPowerlift (telescopic, rack or spindle) lifting column is used to adjust the height of tables
or other setting tasks of a comparable kind. It is driven by a low voltage motor.

6.1.1 Versions

The lifting column is available in two versions.
The versions differ in the type of controller.
Internal controller (Start-Stop)
The controller is built into the lifting column. The lifting column is driven with a hand switch that
is connected directly to the column.
External controller
The lifting column is connected with an external controller. The controller is not in the lifting co-
lumn, but in the external controller. The hand switch for driving the lifting column is connected
to the external controller. A maximum of two lifting columns can be connected to a single con-
troller.
After receiving this lifting column, check the device for possible damage and missing com-
ponents.
If you find any faults, inform RK Rose+Krieger GmbH of these immediately.
36