Product Information; How It Works; Designs/Guidance Concept; Designs - Phoenix Mecano RK ROSE+KRIEGER quad EV Notice D'assemblage

6. Product information

6.1 How it works

The linear unit is used for linear processing and positioning. The slides are driven into their posi-
tions by a tapped spindle or toothed belt drive. This motion can be effected manually with a
handwheel or by an electric drive. Depending on the version, the slides are guided without any
play on rail sections or steel guide shafts with rollers.

6.2 Designs/Guidance concept

This linear unit is available in the designs and guidance versions given here.
•
After receiving this linear unit, check the device for possible damage and missing components.
•
Notify RK Rose+Krieger GmbH of any faults found immediately.
The linear unit is delivered ready for operation, but without a controller and without accessories.

6.2.1 Designs

®
quad EV linear unit
(Trapezoidal threaded spindle)
®
quad AV linear unit
(Trapezoidal threaded spindle)
Spindle versions:
•
Right-hand thread
•
Left-hand thread
•
Right/left hand thread
•
Divided spindle
40