Protection Devices On The Machine - Diamond LCF-10 Mode D'emploi

PROTECTION DEVICES ON THE MACHINE

The machine protections and safety devices must not be removed.
If they must be removed for extraordinary maintenance requirements some measures will have to be
immediately adopted ready to put in evidence and to reduce at the possible minimum limit the danger.
The putting back in its place of the protection or of the safety device must happen as soon as the reasons, that
have made necessary their temporary removal, are stopped.
All machine protection and safety devices, both electrical both mechanical, must be maintained in conditions of
perfect and constant efficiency.
The machine transmission parts are completely isolated by means of fixed protections which don't allow the access for none
kinematical chain.
For all safety functions including the control and check systems parts joined to the safety, some well-tested components and
safety principles have been used.
Main shelters and safety devices:
1. taking into account of the machine use modality and of its use destination, the moving elements aren't isolated from
fixed protections and from moving shelters, disposed so that to prevent the dangerous points reaching,
2. on the transparent superior cover a micro switch is placed that stops the machine functioning, when is opened,
3. on the lateral discharge door a micro switch is placed that stops the machine functioning, when is opened. Maintaining
the discharge lateral door handle and activating the maintained action control device, it is possible to control the dish
rotation within the machine to facilitate the food products leakages,
4. the internal distance between the abrasive dish edge or with bristles and the basin internal surface in correspondence of
the discharge mouth is inferior to 6mm.
Transparent superior cover with micro switch
5-10-18 Kg Version
Lateral discharge door with micro switch
10-18 Kg Version
Pag. di
9 17