Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
nect the transformer and connecting
cable from the socket when installing.
Avoid the risk of fatal injury
from electric shock
Before use, ensure that the available mains
voltage is the same as the voltage required for
operating the appliance (230–240 V∼).
Before connecting the light set to the mains,
always check it and the mains adapter for any
damage.
Never use the light set if you discover that it is
damaged in any way.
Never open any of the components of the
electrical equipment or insert any objects into
the same components.
Protect the mains lead from sharp edges,
mechanical stress and hot surfaces.
Do not secure with sharp staples or nails.
Always unplug the mains adapter from the
socket before assembling, disassembling or
cleaning.
Never touch the plug of the fairy lights or the
fairy lights itself with wet hands.
Never electrically connect the fairy lights to
other fairy lights.
Disconnect the fairy lights from the mains when
they are not being used for extended periods.
If you have any questions about the product or
are unsure about any of its aspects, please
seek the advice of an electrical equipment
specialist.
Only use the fairy lights with the included
mains adapter. Otherwise any warranty claims
will be void.
These fairy lights are splash-proof (IP44). This
protection class will only be maintained, if the
electrical socket used also complies with at
least this protection class.
CAUTION! RISK OF ELECTRIC SHOCK!
These fairy lights are rain- and splash-proof
(IP44), but do not near water or other liquids,
or in locations where water and other liquids
may collect. Do not immerse the fairy lights in
water. Maintain a minimum distance of
Safety / Start-up / Maintenance and Cleaning
approx. five metres from swimming pools or
ponds. Protect the transformer from moisture.
Never wear metallic or conductive jewellery
such as necklaces, bracelets, rings, etc. when
performing any work, including cleaning!
Start-up
Assembly
Do not attach objects to the product.
The product must be assembled and used in a
way which prevents large amounts of dirt.
Protect the mains lead from sharp edges,
mechanical stress and hot surfaces.
Do not secure with sharp staples or nails.
Plug the plug of the fairy lights
socket of the mains adapter
Turn the connecting thread
lead clockwise to fix the connection.
Switching on and off
Switching on:
Plug the mains adapter
fairy lights are on.
Switching off:
Unplug the mains adapter
to switch the fairy lights off.
Maintenance and Cleaning
CAUTION! RISK OF ELECTRIC SHOCK!
First of all pull the mains adapter out of the mains
socket.
CAUTION! RISK OF ELECTRIC SHOCK!
For reasons of electrical safety the device must
never be cleaned with water or other liquids or
immersed in water.
Do not use solvents, benzene or similar
substances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
into the
1
.
2
of the mains
4
into the socket. The
2
from the socket
2
GB
17
Publicité
Table des Matières
