Switching The Lamp On / Off; Selecting The Light Colour; Dimming; Usb Port - LIVARNO LUX TI-LED-00798 Instructions D'utilisation Et Consignes De Sécurité

You can adjust the LED table lamp
to the lighting conditions you re-
quire. To do so, use the 4 joints:
1. Turning joint with lamp base
: the lamp arm
6
turned approx. 22.5 ° in both
directions from the midpoint.
2. Lower tilt joint: with this you
can move the lamp arm
approx. 90 ° upwards or
downwards.
3. Upper tilt joint: with this you
can move the lamp head
approx. 135 ° upwards or
downwards.
4. Turning joint in the lamp head
: with this you can turn the
1
lamp head
directions.
Switching the
lamp on / off
Switch the lamp on or off
using the ON / OFF switch
on the lamp base
All you need to do here is
press it with your finger
(touch button).
40 GB
can be
2
2
1
90 ° in both
1
3
.
6
Selecting the
light colour
You can set the colour of the light
in 5 stages from warm-white
2700 K to cold-white 6500 K.
Touch the light colour selec-
tion button
4
you switch the lamp on, it will
automatically be set to the
last light colour to have been
used.

Dimming

You can dim the light in 7 stages.
Touch the dimmer button
on the base of the lamp
for this.

USB port

You can find the USB port
the back of the lamp. You can
charge mobile phones, tablets
and other such devices here.
for this. When
5
6
on
8