Space Requirement; Levelling The Refrigerator; Positioning - Candy CHSVN 174X Manuel D'instructions

•
Unscrew bottom
hinges.
". After the appliance is positioned! install the doors
as reversed process.

Space Requirement

•
Select a location without direct exposure to
sunlight;
•
Select a location with enough space for the
refrigerator doors to open easily;
•
Select a location with level (or nearly level)
flooring;
•
Allow sufficient space to install the refrigerator
on a flat surface;
•
Allow clearance to the right, left, back and top
when installing. This will help reduce power
consumption and keep your energy bills lower.
At least
50 mm
At least
50 mm

Levelling the refrigerator

Clockwise rotate feet to heighten them by hand.
Anticlockwise rotate feet to lower them by hand.

Positioning

Install this appliance at a location where the
ambient temperature corresponds to the climate
class indicated on the rating plate of the appliance:
Climate claas Ambient temperature
SN + 10°C to+32°C
N 1 + 16°C to +32°C
ST + 16°C1o+38°C
T + 16°C to +43°C
Location
The appliance should be installed well away from
sources of heal such as radiators, boilers, direct
sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best
performance, if the appliance is positioned below
an overhanging wall unit, the minimum distance
between the top of the cabinet and the wall unit
must be at least 100 mm. Ideally, however, the
appliance should not be positioned below
overhanging wall units. Accurate leveling is ensured
by one or more adjustable feet at the base of the
cabinet, and the wall unit must be at least 100 mm.
Ideally, however, the appliance should not be
positioned below overhanging wall units. Accurate
leveling is ensured by one or more adjustable feet
at the base of the cabinet.
Doors
13