Espressions EP9551 Manuel D'instructions page 4

Attaching your stainless steel
Pasta Roler
Before attaching your Stainless Steel Pasta
Roller to your Planetary Mixmaster Power
®
Drive, remove any packaging material and
promotional labels or tags. Do not immerse
the roller into water or liquid, wipe down
with a soft cloth.
1. Unplug stand mixer.
2. Turn mixer OFF.
3. Remove Power Drive Cover and store in
the storage location at the back of the
mixer head.
6
4. Select Pasta Cutters. Insert accessory
into power drive with the feeder roller
positioned at the top. Turn roller in an anti-
clockwise position to lock into place.
5. Please refer to instructions for the Cafe
Series Planetary Mixmaster Power Drive
® ®
on using your bench mixer.
Using your stainless steel
Pasta Roler
Pasta Sheet Roller
The adjustment knob lets you change the
width between rollers to knead and roll pasta
to desired thickness.
To Use
1. Prepare pasta dough using the Traditional
Pasta Dough recipe on page 10. Cut dough
into 4 pieces. Cover remaining 3 pieces.
Shape one portion of pasta dough with
your hands to about 1.5cm thick and a
rough rectangle shape. Lightly flatten. Dust
with flour.
2. Set adjustment knob on pasta roller at 1 by
pulling the knob straight out and turning
to setting 1. The numbered graphics are
shown on the knob. Release knob, ensuring
the knob locks in place, against the roller
housing.
3. Turn mixer to speed 1. Feed the flattened
portion of pasta dough into the roller. Once
the dough is passed through the roller, fold
dough in half and roll again. Repeat the
process several times. Lightly dust pasta
with flour while rolling to prevent any
dough sticking to rollers.
7