Programming With The Easy Base Unit; Configuration Parameters (Easy) - Gewiss CHORUS GW 10 767 Mode D'emploi

PROGRAMMING WITH THE EASY BASE UNIT

5.
5.1
After creating the required function the actuator's operating parameters
can be set from the "Application → Parameters" menu.
The parameters available, in relation to the function created, are listed
in the following table.
The underlined value is the default value.
Function: For all functions
Parameter: Operation mode
shutters
blinds
Function: alarm
Parameter: Alarm mode
No alarm
Alarm pos.: DOWN
Alarm pos.: UP

CONFIGURATION PARAMETERS (EASY)

Handling of Shutters
Handling of blinds and regulation of laths
Alarm signal ignored
Complete raising of the shutters
Complete closure of the shutters
22