Introduction; Operating; Switching On - Vetus SENSORD Manuel D'utilisation Et Instructions D'installation

1

Introduction

This manual gives information about the use,
installation and setting of the tank manager.
The tank manager consists of a display instru-
ment and an ultrasonic level sensor for each
tank.
A maximum of 8 sensors for 8 different tanks
can be connected to each instrument.
The volume of liquid in a maximum of 4 dif-
ferent tanks can be displayed on the instru-
ment simultaneously, in litres, Imperial Gal-
lons or US Gallons according to choice.
The maximum tank volume which can be dis-
played on the screen is 6553 liter.
The sensors required must be purchased sep-
arately (Art. code: SENSORB).
Read the instructions supplied with each sen-
sor before installing the sensors.
1.1 Included in the delivery
- 1 display instrument
- 1 8-pin female socket
- 1 UTP network cable (5 metres)
- 1 UTP splitter
- Assembly seal
- 4 metal rings + M4 nuts
- Drilling template
- Installation instructions
Ultrasonic tank management system
2

Operating

2.1

Switching on

Switch on the instrument using an external
switch (there is no ON/OFF switch on the in-
strument).
A welcome screen is displayed briefly after
switching on.
vetus
Tank level display
The contents of the tank or tanks will be dis-
played after this.
80
L
Vetus
ENGLISH
1690
L
Vetus
27
090430.01