5 Cleaning The Foam Filter; 5 Cleaning The Hepa Filter - LG LuV350P Serie Manuel D'utilisation

Cleaning the Foam Filter
CAUTION
y A wet filter can cause permanent damage to the
vacuum cleaner.
y Be sure filters are completely dry before reinstalling.
For optimal performance, check the filters every month and clean
when necessary. Don't close the dusk tank lid without the foam
filter.
To clean the foam filter:
1. Remove the dusk tank from the vacuum cleaner.
2. Lift up on the dust tank lid release and open the lid.
3. Lift out the foam filter.
4. Separate the foam filter from the filter frame.
5. Shake out any excess dirt or debris and rinse the foam filter and filter
frame with clean water. Squeeze out water from the foam filter.
6. Dry completely away from sunlight.
NEVER operate the vacuum cleaner with wet filters or
components.
If you notice a loss of suction and cleaning the foam filter does not
help, you may need to replace the foam filter. You can purchase
additional foam filters from LG by calling 1-800-243-0000 (U.S.A.),
1-888-542-2623 (Canada) and asking for parts on page 6.
Cleaning the HEPA Filter
To Clean the HEPA Filter:
1. Remove the exhaust filter cover.
Exhaust Filter
Cover
2. Remove the filter from the body.
Filter
3. Wash the filter thoroughly in flowing water.
4. Remove moisture.
5. Dry completely away from sunlight.
15
CARE & CLEANING