Zephyr ARC Serie Notice D'utilisation page 27

NON-DUCTED INSTALLATION
Purchase Non-ducted Recirculating Kit
from your local dealer,
The kit includes the charcoal filter/s and
the top cover.
Ref. ZRC-00IN (Mod. Incline)
Ref. ZRC-00WA (Mod. Wave)
Fix the top cover with (3) 3,9 x 6mm mounting
screws working from inside the hood (Fig. 27).
Model Incline
Install the CHARCOAL filters, place it over
the mesh filter and lock it with a charcoal
filter holders (Fig.28). Make sure the filter is
securely engaged after assembly.
Model Wave
Reassemble the metal panel with (6) M4x8mm
screws. See Fig. 10.
Install the charcoal filter plate with (4)
M4x6mm mounting screws (Fig. 29).
Install the CHARCOAL filter, align filter in
rectangular opening. Push filter against
springs in rear of hood and press into place.
Make sure the filter is securely engaged after
assembly (Fig. 30).
Model Wave
sold separately.
FIG.29
- 27 -
3.9 x 6 mm
Flat Head
MOUNTING SCREWS
Model Incline
CHARCOAL FILTER
MESH FILTER
Model Wave
FIG.27
FIG.28
FIG.30