Control Panel; Function Buttons; Display; Swivel Arm - Bosch MUM5X Serie Manuel D'utilisation

Display

The illuminated
ring does not
light up and pro-
cessing cannot
start.
The illuminated
ring flashes and
processing can-
not start or con-
tinue.
Tip: You can find further information
here:
→ "Safety systems", Page 39
→ "Troubleshooting", Page 46
5.4 Control panel
You can find an overview of the con-
trol panel here.
→ Fig.
3
Reset button
1
Scales button
2
Display
3
Symbol Weight in pounds
4
Symbol Weight in grammes
5
Symbol Time in minutes and
6
seconds
5.5 Function buttons
You can use the function buttons to
select additional functions or config-
ure settings. To make a selection,
touch the relevant symbols with your
finger.
Symbol Function
Switch scales on and off.
¡ Reset scales.
Status
¡ The appliance
has no power
supply.
¡ There is a fault
with the appli-
ance.
¡ A safety sys-
tem has been
activated.
¡ There is a fault
with the appli-
ance.
Familiarising yourself with your appliance en
Symbol Function
¡ Reset timer.
Note: Press the buttons with your fin-
gers without wearing rubber/oven
gloves. Do not operate buttons with
objects, e.g. a wooden spoon.
5.6 Display
The display shows values and mes-
sages about the operating status.
Note: The display will switch off auto-
matically if the appliance is not oper-
ated for a given period of time. To re-
activate the display, press a button or
start processing.
5.7 Swivel arm
The swivel arm can be adjusted and
fixed in different positions.
If the release button is pressed, the
swivel arm can be moved to the re-
quired position.
→ "Moving the swivel arm", Page 40
Note: The swivel arm features the
EasyArm Lift function. This function
supports upwards movement of the

swivel arm.

Swivel arm positions
You can find an overview of the posi-
tions of the swivel arm here.
Posi- Use
tion
Posi- Swivel arm is closed.
tion 1 ¡ Process ingredients with
¡ Use accessory on main
¡ Use accessory on drive
tools.
drive, e.g. Ice maker.
2, e.g. Continuous feed
shredder
37