Vertical Ironing - Philips PerfectCare Elite GC9600 Serie Mode D'emploi

Using your appliance
Ironing
Please read the quick start guide in the packaging carefully to start using your appliance.
Steam boost function
The steam boost function is designed to help tackle difficult creases.
- Double press the steam trigger for a continuous shot of steam. It is not necessary to press and
hold the steam trigger continuously when the steam boost function is activated. To stop the
steam boost function, press the steam trigger once. (Fig. 4)

Vertical ironing

Hot steam is emitted from the iron. Never attempt to remove creases from a garment
that someone is wearing. Do not apply steam near your or someone else's hand.
You can use the iron in vertical position to remove wrinkles from hanging fabrics.
1 Specific types only: put on the glove.
2 Hold the iron in vertical position, press the steam trigger and touch the garment slightly with
the soleplate (Fig. 5).
ECO setting
During ironing, you can use the ECO setting to save energy but still have sufficient steam to iron all
your garments.
Note: For the best results, we advise you to use the 'Optimal Temp' setting.
1 Press the ECO button. (Fig. 6)
The ECO button lights up green.
,
2 To switch back to the 'Optimal Temp' setting, press the ECO button again.
The green light in the ECO button goes out.
,
TURBO setting
You can use the TURBO setting for faster ironing and a higher amount of steam. You can also use it
for vertical ironing.
Note: As the TURBO function produces a high amount of steam, the supply hose may become hotter than
at the OptimalTemp and ECO settings. This is normal.
1 Press and hold the on/off button for 2 seconds until the light turns white. (Fig. 7)
The 'iron ready' light on the iron and the white TURBO light in the on/off button start to
,
flash to indicate that the iron is heating up to the TURBO setting. This takes up to 2 minutes.
2 To switch back to the 'Optimal Temp' setting, press and hold the on/off button for 2 seconds
until the light turns blue again.
Safety auto-off mode
- To save energy, the appliance switches off automatically when it has not been used for 10 minutes.
The auto-off light in the on/off button starts to flash (Fig. 8).
- To activate the appliance again, press the on/off button. The appliance then starts to heat up again.
Note: The appliance is not switched off completely when it is in auto-off mode. To switch off the appliance,
press the on/off button.
ENGLISH
7