Tips; Troubleshooting - INVENTOR MP630B-BS Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74

11. TIPS

in the refrigerator.
Avoid extensive use of the door on wet and hot weather, keep in mind, once the door
is opened to shut the soonest possible.
Do not place goods in direct contact with the wall of the refrigerator, always allow
some space.
Be certain the wall behind the appliance is dirt and dust free, especially with outer
condenser equipped units.
Do not place goods that are not sealed or well packed directly under the chill box.

12. TROUBLESHOOTING

ISSUE
Appliance is not
working
Temperature in
refrigerator is too
high or too low
Condensation
appears on the
outside surface of
the unit
Appliance is
making a noise
Odor
16
CAUSE / REMMEDY
The plug is not in the socket. Put the plug in the socket.
Thermostat has been set incorrectly. Set the thermostat
correctly.
This may be caused by a change in the room's temperature.
Use a soft cloth to wipe away any condensation. If the
assistance.
1) The refrigerant liquid causes noises in the cooling system.
2) Noise is produced while the compressor is operating, as
3) Make sure the refrigerator is levelled and balanced.
4) Goods have been placed incorrectly in the refrigerator.
Place the goods correctly in the refrigerator.
5) Check if the refrigerator's components are in the proper
position.
1) Goods are not stored in sealed containers
2) There are spoiled goods inside
3) The interior needs to be cleaned
EN

Publicité

Table des Matières

Dépannage

loading

Ce manuel est également adapté pour:

Mp630s-bsMp630sMp630sec

Table des Matières