Tips; Troubleshooting - INVENTOR INVMS98A2 Manuel De L'utilisateur

11. TIPS

Do not place products too close. Ensure a sufficient distance for optimum air circulation
✓
in the refrigerator.
Avoid extensive use of the door on wet and hot weather, keep in mind, once the door
✓
is opened to shut the soonest possible.
Do not place goods in direct contact with the wall of the refrigerator, always allow
✓
some space.
Never place inside the unit, hot or even warm goods without allowing them to chill first.
✓
Be certain the wall behind the appliance is dirt and dust free, especially with outer
✓
condenser equipped units.

12. TROUBLESHOOTING

ISSUE
Appliance
is not working
Lighting
is not operating
Temperature
in refrigerator
is too high
or too low
Condensation
appears on the
outside surface of
the unit
Appliance is
making a noise
EN
CAUSE / REMMEDY
The plug is not in the socket. Put the plug in the socket.
Lamp defective. Replace the bulb as it is suggested on the
section "MAINTENANCE & CLEANING".
Thermostat has been set incorrectly. Set the thermostat
correctly.
This may be caused by a change in the room's temperature.
Use a soft cloth to wipe away any condensation. If the
problem remains, contact a certified technician for
assistance.
1) The refrigerant liquid causes noises in the cooling system.
2) Noise is produced while the compressor is operating, as
refrigerant fluid is being pumped within the unit.
3) Make sure the refrigerator is levelled and balanced.
4) Goods have been placed incorrectly in the refrigerator.
Place the goods correctly in the refrigerator.
5) Check if the refrigerator's components are in the proper
position.
15