ERMILA 4414 Mode D'emploi page 9

Masquer les pouces Voir aussi pour 4414:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Description of parts (Fig. 1)
A Heating plates, spring-loaded
B Handle
C LCD display
D Temperature switch
E On/off switch
F Mains cable with hanging loop
Operation
·
Connect to the mains power supply. A double
acoustic signal will sound.
·
Switch on the appliance by shortly pressing the on/
off switch (E) once (Fig. 1). An acoustic signal will
sound. The LCD display lights up blue and shows
the current temperature. The highest temperature is
preset at 230°C.
·
Adjust the desired operating temperature by using
the temperature switches (D). An acoustic signal will
sound during adjustment. The operating tempera-
ture can be set within a range of 80–230°C in 10°C
increments.
 Increase temperature
 Reduce temperature
·
Once the set operating temperature has been
reached, the display shows the temperature.
·
After use, switch off the appliance by longer press-
ing the on/off switch (E) (Fig. 1). The LCD display
goes out.
·
Disconnect from the mains power supply.
·
Allow the appliance to cool down.
Temperature switch lock
The temperature switches will be deactivated
·
by shortly pressing the on/off switch (E) twice.
The temperature setting is now fixed against
unintentional alteration during operation. An
acoustic signal will sound.
The temperature switches will be reactivated by
·
shortly pressing the on/off switch (E) twice.
Automatic switch-off
The appliance switches itself off automatically if no
switch is pressed within 50 minutes.
CERAMIC- & TOURMALINE-coated heating
plates
Negative ions have an antistatic effect and are gen-
tle to the hair. They close the scale layer, creating a
smooth, silky hair surface and locking in the natural
moisture of the hair, thereby creating the ultimate
shine.
Tips for successful styling
·
Wash hair, rinse and dry well.
·
Brush or comb hair.
·
Section off individual strands of hair.
·
At the hairline, place a section of hair between the
heating plates.
·
Keep the straightener pressed together for a few
seconds and slowly pull it down the section of hair
away from the head.
Important note: When using the appliance for the
first time, set it to the lowest temperature. Do not
leave the sections of hair in the straightener for
more than a few seconds, otherwise this could dam-
age the hair. Only increase temperature gradually.
·
Open the straightener and allow the section of hair
to slip out.
·
Repeat the procedure until the desired result has
been achieved.
Cleaning and care
·
Before cleaning the appliance, disconnect from the
mains and allow it to cool down.
·
Do not immerse the appliance in water.
·
Only wipe the appliance with a soft cloth, which
may be dampened slightly. Do not use solvents or
abrasives!
Disposal
Adhere to the relevant legal requirements when dispos-
ing of the appliance.
Information on the disposal of electrical and elec-
tronic appliances in the European Community:
Within the European Community, national
regulations are specified for the disposal of
electrical appliances, based on EU Waste
Electrical and Electronic Equipment Directive
2012/19/EC (WEEE). In accordance with this,
the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge
by local collection points or recycling centres.
The packaging for this product is made from
recyclable materials. Dispose of this in an
environmentally friendly manner by recycling it.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
9

Publicité

Table des Matières
loading

Produits Connexes pour ERMILA 4414

Table des Matières