Honeywell VisionPRO TH8000 Serie Mode D'emploi page 21

Dehumidification control
Press to select
Auto or Off
73
Inside
AUTO
DONE
Press to save & exit
Press to set
desired humidity
DEHUMIDIFIER
55
CANCEL
MCR29721
Press MORE until the dehumidifier screen is
displayed, then press
humidity level and operation (Auto or Off).
If installed to control a dehumidifier, the thermo-
stat can activate it as needed to reduce humidity.
If you don't have a dehumidifier, the thermostat
activates the air conditioner to reduce humidity
(may cool as much as 3°F lower than your tem-
perature setting).
Press DONE to save and exit, or press CANCEL to
exit without saving changes.
Note: Dehumidification control not available on all
models.
19
VisionPRO TH8000 Series
®
or to set the desired
s t
69-2400EFS—05