Honeywell VisionPRO TH8000 Serie Mode D'emploi page 20

Operating Manual
Humidification control
Set Frost Control & humidity level
32
Inside
Auto
DONE
Press to save Press to select
& exit Auto or Off
69-2400EFS—05
Press MORE until the humidifier screen is dis-
played, then press
and Frost Control level.
5
When using Frost Protection, if frost/condensa-
tion appears on windows, lower the frost setting.
Wait at least 1 day before adjusting the frost level
FROST
DEHUMIDIFIER
again. Once frost no longer appears, the thermo-
55 stat will control humidity to the maximum level
without frosting or fogging windows and without
further adjustment.
CANCEL
Press DONE to save and exit, or press CANCEL to
MCR29720
exit without saving changes.
Note: Humidification control not available on all models.
Note: If you do not have an outdoor temperature
sensor, the Frost Control level will not be displayed.
or
s
18
to set the humidity
t