Christie LX120 Guide De Référence Rapide page 6

SIDE CONTROLS AND INDICATORS
FRONT
INDICATORS
SIDE CONTROLS
ZOOM BUTTONS FOCUS BUTTONS
Used to adjust zoom. Used to adjust focus.
MENU BUTTON
Used to open or close
MENU operation.
SELECT BUTTON
Used to execute item
selected. It is also used
to expand image in
DIGITAL ZOOM mode.
AUTO PC ADJ. BUTTON
Use to operate AUTO
PC Adjustment function.
POINT BUTTONS
Used to select an item or
adjust value in MENU. It
is also used to pan image
in DIGITAL ZOOM mode.
FRONT INDICATORS
REAR
INDICATORS
SIDE CONTROLS
This LAMP REPLACE
indicator lights yellow
when any of Projection
Lamps is nearing its end,
and flashes when any of
POWER ON–OFF
them becomes out.
BUTTON
Check
needs to be replaced on
Used to turn a projector
on or off. Lamp Status Display.
LENS SHIFT BUTTON
Used to select LENS
SHIFT function.
INPUT 1/2 BUTTON
Used to select input
source either INPUT 1 or
INPUT 2.
INPUT 3/4 BUTTON
Used to select input
source either INPUT 3 or
INPUT 4.
IMAGE BUTTON
Used to select
image level.
INDICATORS
LAMP REPLACE WARNING TEMP.
INDICATOR INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
which lamp
REAR INDICATORS
READY INDICATOR LAMP INDICATOR
This indicator lights This indicator is dim
green when a projector when a projector is
is ready to be turned on. turned on. And bright
And it flashes green in when a projector is in
Power Management stand-by mode.
mode.