Formatting The Card [Format] - Olympus DS-2500 Mode D'emploi

Formatting the card [Format]

Cards that have been used in non-Olympus devices,
or cards that are not recognized by the recorder,
must be formatted before they can be used with the
recorder.
To familiarize yourself with the formatting process,
read the steps below.
In terms of formatting, only selected cards can be
formatted, the recorder's menu settings cannot be
initialized. The initialization of menu items should be
set up through DSS Player or the recorder's [Reset
Settings].
3
PLAY/OK
1
Select [Device Menu] at the [Format]
screen, then press the PLAY/OK or 9
button.
• Refer to P.41 regarding each menu item
settings.
Device Menu
Power Save
Time & Date
Battery
USB Settings
12
Reset Settings
Format
BACK EXIT
EN
50
2
3
PLAY/OK button
+, −, 9 button
4
5
Press the + or – button to select [Start]
option.
Format
Start
Cancel
BACK EXIT
Press the PLAY/OK button to confirm
[Start] selection.
Format
Data will be
cleared
Press the + or – button again to select
[Start] option.
Format
Are You Sure?
Start
Cancel
BACK EXIT
Press the PLAY/OK button again to
initiate the formatting process.
Format
Format !
• [Format Done] displays when formatting
ends.
Format
Format Done