Baninni SOPRA Mode D'emploi page 19

As shown in Figure 7: Press the adjusting
button and pull the leg upwards at the
same time. To get the intended position,
align the arrow on leg to the position
number, then loose the adjusting button.
There are 3 positions. After unfolding,
press the seat slightly to make sure the
legs are fully folded.
As shown in Figure 8: use the same handle
for the other leg, to make sure the two
legs are adjusted to the same height posi-
tion. (That is, the same position number).
USER INSTRUCTIONS
Å
~ Ä
ADJUSTING TRAY
As shown in Figure 10, press the locking
button on the both sides of tray, push the
feeding tray forward or backwards to the
intended position.
(There are 3 positions optional.)
REMOVING TRAY
As shown in Figure 10, press the locking
button on the both sides of tray, pull the
feeding tray out.