Transport And Handing - Signature SRUS5000XAQUA Manuel D'utilisation

TRANSPORT AND HANDING

When transportation, hold the base and lift the
refrigerator carefully with an angle inferior at 45
degree. Never hold the door handle as support.
Never place it upside down nor horizontally. Push
refrigerator on its basis and place it thanks to its roller
feet.
INSTALLATION
To fix stably, the appliance must be placed on a flat
and solid surface. It should not be laid on any soft
material.
Choose a location where there is no heat source.
Keep the refrigerator away from direct sunlight or
other appliance producing heat.
Choose a dry and well-ventilated place where there
is no corrosive air.
In order to improve efficiency of the cooling system
and save energy, it is necessary to maintain good
ventilation around the appliance for the dissipation of
heat. For this reason, sufficient clear space should be
available around the refrigerator.
The appliance is supplied with two plastic spacers.
After installation of these spacers, the appliance
cannot be pushed against the wall to maintain
proper ventilation. Insert the spacers into the relevant
openings on the back of the appliance, then screw
the spacers tightly. Place the appliance against a
wall with a free distance that not exceeding 75 mm
but more than 50mm.
-49-