Wolf E Serie Guide D'utilisation Et D'entretien page 9

OVEN OPERATION
Oven Operation
CLOCK
The clock is visible on the control panel during all cooking
modes, except when the timer is in use. It is very important
the clock is set to the correct time if timed cook feature is
used. Clock must be reset after a power failure.
Setting clock:
Touch SET CLOCK on the control panel.
1
Touch number pads to set time of day.
2
Touch ENTER, then touch 1 for AM or 2 for PM.
3
Touch ENTER.
4
TIMER
The timer can be set for a maximum of 9 hours, 59 minutes.
Once a time is set, the countdown is illuminated on the con-
trol panel display. The last minute counts down in seconds.
When complete, the oven will chime and time will flash. The
timer will continue to chime every 10 seconds until CLEAR
is touched. The timer is independent from the oven. Setting
the timer does not affect cook time or stop time. For infor-
mation regarding auto program features, refer to page 12.
Setting timer:
Touch SET TIMER on the control panel.
1
Touch number pads to set time in hours and minutes.
2
Touch ENTER.
3
EXTENDED OPTIONS
The extended options feature allow the user to select prefer-
ences for language, temperature unit, temperature offset,
12/24 hour clock, backlight brightness, contrast adjustment
and beeper (chime) tone.
Setting extended options:
To enter extended options mode, touch and hold SET
1
CLOCK for 5 seconds.
Touch ENTER to scroll through options, then follow
2
instructions on the control panel display.
To exit, touch CLEAR.
3
|
wolfappliance.com 9