The Learning Feature - Acoustic Research ARRS05G Manuel D'utilisation

The Learning Feature

After you have programmed this remote to operate your device,
you may find that there are one or more keys that you had on your
original remote that the AR remote doesn't have. This remote offers
a Learning feature that lets you copy functions from your original
remote control.
Before you start:
• Make sure your original remote control is working correctly.
• Make sure neither the AR remote nor your original remote
control is pointing at your device.
To learn a function from your original remote:
1. Place both remote controls (the AR remote and your original) on a
flat surface. Make sure the ends you normally point at devices are
facing each other. Keep the remotes at a distance of 2 to 5 cm.
5. Press the key on the AR remote you want to use for the learned
function. For example, if you want the remote to send the learned
command when you press the VOD key, press VOD. The device
key flashes rapidly.
6. Press and hold the key on your original remote that you want
to copy to the AR remote. Wait until the device key on the
AR remote blinks twice, then release the key on your original
remote.
8. To exit the learning mode, press and hold SET until the device
key blinks twice.
2. Press and hold the SET key until one
of the device keys blinks twice (the red
LED blinks once, then twice).
3. Press 9 7 5 (the device key blinks
twice).
4. Press the key on the AR remote for
the device you want to use the learned
function in. For example, if you want to
learn a function to use with your TV,
press TV.
7. If you want to copy other functions
within the same mode, repeat steps 5
and 6 for the next key you want to copy
by learning.
9