Reassigning Device Keys - Acoustic Research ARRS05G Manuel D'utilisation

Deleting All Learned Functions in a Mode
1. Press and hold the SET key until one of the device keys blinks
twice (the red LED blinks once, then twice).
2. Press 9 7 6 (the device key will blink twice).
3 Press the appropriate device key twice.

Reassigning Device Keys

By default, device keys are assigned to certain kinds of devices
(see page 2 for the list). If you want to use a device key for a
different kind of device, you can reassign it. This is useful if you
want to set up two of the same kind of device on this remote. Once
you've reassigned the device key, you can program it following the
instructions in the "Setting Up the Remote" section.
To reassign a device key:
1. Press and hold the SET key until one of the device keys blinks
twice (the red LED blinks once, then twice).
2. Press 9 9 2 (the device key blinks twice).
3. Press the device key for the kind of device you want to control.
To control a...
Second TV
Second DVD player or VCR
Second cable box, satellite receiver,
or digital TV converter
Second audio component
4. Press the device key you want to reassign for this kind of device.
Resetting a Device key
To reset a device key to its original device type:
Press and hold down the SET key until the device key blinks
1.
twice (the LED blinks once, then twice).
2. Press 9 9 2 (the device key blinks twice).
3. Press the device key you want to reset to its original device type.
4. Press the device key a second time. The device key blinks twice.
Press...
TV
DVD/VCR
CBL/SAT (DTC)
AUDIO
11