Simple Steps To Start - Samsung DW60A6090F Serie Manuel D'utilisation

Simple steps to start

1. Open the door, and then load the dishwasher. Make sure to remove food remains and
waste on the dishes.
2. Apply detergent to the detergent dispenser. For better results, add rinse aids.
3. Press POWER, and then select a cycle with necessary options (Upper rack only,
Lower rack only, Sanitize, Multi tab, and Delay Start). Some options may not be
available depends on the cycle.
NOTE
• If you select Lower rack only, make sure the dishes are loaded in the lower rack.
• If you select Upper rack only, make sure the dishes are loaded in the upper rack.
4. Press START, and then close the door. The dishwasher starts the cycle after draining for
a few seconds.
NOTE
• To change the cycle after it has started, press and hold START for 3 seconds to cancel
the cycle. Then, select a new cycle.
• The default cycle is ECO.
• To resume after you have opened the door to stop the dishwasher while operating,
simply close the door.
DW6500AM_DW60A6092FW_ET_DD81-04050D-00_EN.indd 53
English 53
2021-02-24 4:37:33