Dörr SLIM LED VIDEOLICHT SVL-112 PRO Notice D'utilisation page 10

05 | OPERATION
Press On/Off/Menu button (03) for about 3 seconds in order to turn on the LED video light.
Press On/Off/Menu button (03) shortly to switch from brightness
selected menu point in the display (02):
The toggle switch for adjustments (04) increases brightness and colour temperature when moved upwards (+).
The toggle switch for adjustments (04) decreases brightness and colour temperature when moved downwards (-).
Brightness is adjustable in 5% steps, while colour temperature is adjusted in 100° Kelvin steps.
During operation, the display (02) shows the remaining battery power in h (hours) or m (minutes).
The battery symbol shows the battery capacity graphically.
Press On/Off/Menu button (03) for about 3 seconds in order to turn off the video light.
CAUTION:
·
During operation, the housing and LEDs will warm up.
·
Turn off the device after usage by using On/Off/Menu button (03).
·
Let the device cool down completely, before placing it in the storage pouch.
06 | MOUNTING
06.1 Mounting on a camera/camcorder with flash hot shoe
Screw the universal flash hot shoe (10) into the ¼" connection thread (01) of the video light. Slide the universal flash hot shoe (10) into
the hot shoe mount of your camera or your camcorder. Tighten the locking screw (10a).
06.2 Mounting/unmounting the diffusor plate
The white diffuser plate (07) provides soft light and reduces harsh shadows. Place the diffusor plate (07) onto LED panel on the front
side of the video light. Press all 4 corners gently until the 4 holders for diffusor plate (07a) snap in the notches of the video light. In
order to remove the diffusor plate (07) loosen the 4 holders of the diffusor plate (07a) first.
06.3 Mounting/unmounting the honeycomb
The honeycomb (08) directs the light and reduces stray light, while contrast and brilliance are intensified. The illumination becomes
harder. The white diffuser plate (07) must be removed before the honeycomb (08) is installed. Slide the honeycomb (08) from the
side onto the video light. Slide it back to the side to remove it.
10
to colour temperature and back. The arrow
shows the
doerr-foto.de