Accessories; Warranty; Technical Data - IKA ULTRA-TURRAX T 8 Mode D'emploi

Drive unit
Maintenance and Cleaning:
but not immune from wear. The carbon brushes of the motor wear
down over time.
To clean the drive use only water with a detergent that contains
tensides, or use isopropylalcohol for stubborn soiling.
Spare parts order
When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item and designation of the spare part,
see www.ika.de, spare parts diagram and spare parts list
Repair
In case of repair the device has to be cleaned and free from any
materials which may constitute a health hazard.
If you require servicing, return the appliance in its original packa-
ging. Storage packaging is not sufficient. Please also use suitable
transport packaging.

Accessories

S 8 N - 5 G
S 8 N - 8 G
T 8.10
DTM 12
PT 100.23
PT 100.24
T8 122005
The drive unit is maintenance-free
For cleaning disconnect the main plug.
Dispersing element
Dispersing element
Dispersing station
IKA-TRON Temperature measuring unit
Temperature measuring sensor
Temperature measuring sensor

Warranty

In accordance with IKA warranty conditions, the warranty
period is 24 months. For claims under the warranty please contact
your local dealer. You may also send the machine direct to our
works, enclosing the delivery invoice and giving reasons for the
claim. You will be liable for freight costs.
The warranty does not cover wearing parts, nor does it apply to
faults resulting from improper use or insufficient care and main-
tenance contrary to the instructions in this operating manual.

Technical data

Power pack nominal voltage
frequency
output voltage
current consumption A
power consumption
protection class
dimensions WxHxD
Weight
Drive nominal voltage
power consumption
speed
speed setting
dimensions WxHxD
Weight
VAC 230 Euro
VAC 115 USA
Hz 50
VDC 12
2
VADC 24
IP 20
mm 84 x 69 x 122
kg 1,05
VDC 12 ... 18
W max. 100
1/min 5000 - 25000
speed setter infini-
tely variable
mm 42 x 44 x 250
kg 0,4
15